ABUS Accessories
With the accessories in the ABUS product range an ABUS crane may be tailored to
meet specific requirements.
From numerous standard components to the
individual special feature, ABUS will make the operation of your crane system
reliable and safe.
Please find here some excellent examples:
ABULiner  is an effective solution when precise positioning is required with variable
speed hoists. This frequency converter also allows the maximum speed to be
increased above the rated speed when lifting reduced loads. ABUliners are also
available for crane and trolley travel.
ABUS Radio remote control/Tandem control system  Radio remote controls give crane operators greater freedom of movement, allowing
them to choose the position, which gives the best view of their working area and
effectively saving time. ABUS offers radio remote controls with joystick or the
compact Pocket transmitter. ABUS radio remote controls are also suitable for
multiuser operation, with parallel access to several cranes. The ABUS tandem
control system allows the crane operator to control two electrically coupled
travelling cranes at the same time. Ideally, the ABUS radio remote control
system should be used in combination with the tandem control system. With this
control configuration, two crane operators can control the two cranes
separately, or one operator can control both cranes, either separately or
together.
Mini RC  ABUS has developed a special remote control system for the control of
stand-alone chain hoists. The Mini-RC can be used for chain hoists with control
voltage and offers a cost effective alternative to standard market remote
control systems. The Mini-RC is available for the lifting and lowering function
as well as for the additional hoist travel motion.
ABUS Load Measurement system LIS SV
 is designed to protect hoists against overloading. This system is operated by a
signal from a strain gauge combined with a measurement axle, measurement bolt or
similar device. As an option, the load determined can be indicated by a small
load display integrated within the pendant control or by an external large load
display.
Energy chain  can be used to supply power to the hoist or control unit of any ABUS travelling
crane. They protect cables against damage and premature wear and allow easy
access for work on the system. In addition, there are no sagging cables on which
other equipment may snag.
|
